The Hall magnetic module is a switch that will turn on/off in the presence of a magnetic field. If no magnetic field is present, the signal line of the sensor is HIGH (3.5 V). If a magnetic field is presented to the sensor, the signal line goes LOW, at the same time the LED on the sensor lights up. An onboard LED will also indicate the presence of a magnetic field.Precision and high reliability 3144 Series Hall principle of Hall effect switch IC, using technology to produce magnetic semiconductor integrated circuit, which is determined by the voltage regulator, Hall voltage generator.This module has application in Non-contact switch Car ignition Brake circuit Position, speed detection and control Security alarm device Textile control system.Chances are your sensor does not look like the one I used. Regardless, if your sensor is analog
the code should work for yours as well, although your setup will be different. If your sensor has
three pins on it I suggest trying out catch all sensor guides first
Features of Hall magnetic module
1) Signals are output as long as there is a conductor cutting the magnet field.
2) High precision and good linearity , Adjustable sensitivity (accurate adjustment).With no contact, abrasion, shaking, or bound
3) Working voltage: 5V;PCB size: 2.0 x 2.0 cm
4) With power light and signal output indicator
5) Output digital signals, with a 3-pin anti-reverse cable included.
Color:- Black
Operating Voltage(VDC) :- 4.5 to 24
Power Consumption at Rest :- 3mA
Power Consumption when Switched :- 8mA
Operating Temperature (°C) :- -40 to +90
Length (mm):- 20
Width (mm) :- 16
Shipment Weight :- 0.01 kg
Shipment Dimensions :- 3 x 3 x 1 cm
Reviews
There are no reviews yet.