The Green Connector 4 pin 3 pin blue Connector Terminal Block with 0.2 inch pitch. Every single block contains a keying notch. One of these blocks can be attached to another one by keying notch, making it a 6 pin block.The ST-LINK/V2 is an in-circuit debugger/programmer for the STM8 and STM32
microcontrollers. The single wire interface module (SWIM) and the JTAG/serial wire
debugging (SWD) interfaces facilitate the communication with any STM8 or STM32
microcontroller operating on an application board.
In addition to providing the same functionalities of the ST-LINK/V2, the ST-LINK/V2-ISOL
features digital isolation between the PC and the target application board. It also withstands
voltages of up to 1000 V
Features of Green Connector 4 pin
.150″ (3.81mm) Contact Spacing x .130″ (3.30mm) or .150″ (3.81mm) Row
Spacing with staggered Grid
• Plug and Receptacle in 20, 38, 56, 90 and 120 Contact Sizes
• Edacon Hermaphroditic Contact Mating Design
• Contact Termination Options include Crimp, P.C. Tail, Wire Hole and Wire
Wrap
• Mating and Unmating Simplified with use of Actuating Screws
• Optional Covers with Side or Top Entry Cable Clamp in Plastic or Metal
material Available for all Connector Sizes
• Versatile Metal Cover Design permits Assembly or Disassembly After
Cabling is Complete plus Cable Entry Style Flexibility
• Actuating Screws, Locknuts, Polarizing Hardware, Covers and Contacts
Suitable for either Plug or Receptacle
• Polarizing Hardware Adjustable for 288 Mating Combinations
• Tools Available for Contact Installation, Removal and Crimping and
Polarizing Changes
• RoHS Compliant & UL Recognized
Reviews
There are no reviews yet.