Module

HC 12 Wireless Serial Module

The HC-12 is a half-duplex 20 dBm (100 mW) transmitter paired with a receiver that has -117 dBm (2×10-15W) sensitivity at 5000 bps.

Paired with an external antenna, these transceivers are capable of communicating up to and possibly slightly beyond 1 km in the open and are more than adequate for providing coverage throughout a typical house.

The HC-12 circuit board is built around the STM8S003F3 microcontroller and the Si4463 transceiver.

৳ 19,620.00 ৳ 19,290.00
DELTA INVERTER 0.75KW (VFD07B23A) DELTA INVERTER, 7.5KW, 230V 3-PHASE, VFD07B23A, SERIES VFD-B Specification:   Model : VFD07B23A Product Name: VFD Brand

 

Features:

  • 433Mhz
  • wireless serial port communication
  • SI4463 RF chip
  • Can be configured using AT commands
  • Maximum output power is 100mW (20dBm)
  • Receiver sensitivity differs from -117dBm to -100dBm
  • It accepts 3.2V-5.5V and can be used with 3.3V and 5V UART voltage devices (3.3V safe).The HC-12 is a half-duplex 20 dBm (100 mW) transmitter paired with a receiver that has -117 dBm (2×10-15W) sensitivity at 5000 bps.Paired with an external antenna, these transceivers are capable of communicating up to and possibly slightly beyond 1 km in the open and are more than adequate for providing coverage throughout a typical house.

    The HC-12 circuit board is built around the STM8S003F3 microcontroller and the Si4463 transceiver.

     

    Features:

    • 433Mhz
    • wireless serial port communication
    • SI4463 RF chip
    • Can be configured using AT commands
    • Maximum output power is 100mW (20dBm)
    • Receiver sensitivity differs from -117dBm to -100dBm
    • It accepts 3.2V-5.5V and can be used with 3.3V and 5V UART voltage devices (3.3V safe).The HC-12 is a half-duplex 20 dBm (100 mW) transmitter paired with a receiver that has -117 dBm (2×10-15W) sensitivity at 5000 bps.Paired with an external antenna, these transceivers are capable of communicating up to and possibly slightly beyond 1 km in the open and are more than adequate for providing coverage throughout a typical house.

      The HC-12 circuit board is built around the STM8S003F3 microcontroller and the Si4463 transceiver.

       

      Features:

      • 433Mhz
      • wireless serial port communication
      • SI4463 RF chip
      • Can be configured using AT commands
      • Maximum output power is 100mW (20dBm)
      • Receiver sensitivity differs from -117dBm to -100dBm
      • It accepts 3.2V-5.5V and can be used with 3.3V and 5V UART voltage devices (3.3V safe).

Leave a Reply

Your email address will not be published. Required fields are marked *