The Servo – Full Rotation SM-S4303R is a standard-sized servo that has been built by SpringRC specifically for continuous rotation (up to 70 RPM at 6 V), and it is the strongest continuous rotation servo we carry (4.8 kg-cm/67 oz-in at 6 V). It features two ball bearings on the output shaft for reduced friction, and it offers easy access to the rest-point adjustment potentiometer. The servo can be controlled using a direct connection to a single microcontroller I/O line without any additional electronics, which makes it a great actuator for beginner robotics projects. The SM-S4303R continuous rotation servo converts standard RC servo position pulses into continuous rotation speed. The default rest point is 1.5 ms, but this can be adjusted by using a small slotted screwdriver to turn the middle-point positioner. Pulse widths above the rest point result in counterclockwise rotation, with speed increasing as the pulse width increases; pulse widths below the rest point result in clockwise rotation, with speed increasing as the pulse width decreases. Note that this is the reverse of what is described in the datasheet.
This servo rotates fully forward or backwards instead of moving to a position. You can use any servo code, hardware or library to control these servos. Good for making simple moving robots. Comes with four different horns, as shown.
Features of servo – full Rotation :
- Continuous 360° rotation
- Rest point adjustment
- Operating voltage: 4.8-6.0VDC
- Top operating speed: 60-70RPM (4.8-6.0VDC respectively)
- Torque: 3.3-4.8 kg-cm (4.8-6.0VDC respectively)
- 4 plastic gears + 1 metal gear
- Double ball bearing
|Size||39.5 x 20.5 x 42 mm|
(1) About 70 RPM.
(2) About 60 RPM.