The 4.7uF 50v Capacitor High quality miniaturized capacitors utilize case sizes smaller than conventional general purpose caps while maintaining very high performance, low impedance characteristics, 20% tolerance, and an operating temperature of -40° to +85° C.Electrolytic capacitors are widely used in power supplies, switched-mode power supplies and DC-DC converters. This capacitor has long life, low leakage current and wide operating range.ipolar RB Electrolytic capacitors (non-polarised capactiors)
Features of 4.7uF 50v Capacitor
- Capacitance: 4.7uF
- Maximum Voltage: 50 Volts
- Tolerance: ±15%
- Max Temperature: +85°C
- Capacitor Type: Radial Through Hole Electrolytic
- 4.7uF
- 63V
- ±20% Tolerance
- +85°C Max Temperature
- Radial Electrolytic Capacitor
- Capacitance: 4.7uF
- Capacitance Tolerance: +/-20%
- Voltage Rating: 50V
- Lead Spacing: 2.5mm
- Dimension: 5mm x 11mm
- Mounting Type: Through Hole, Radial
- Operating Temperature Range: -40deg/C ~105+deg/C
- Ideally suited for assemb
- Capacitance: 4.7uF
- Capacitance Tolerance: +/-20%
- Voltage Rating: 50V
- Lead Spacing: 2.5mm
- Dimension: 5mm x 11mm
- Mounting Type: Through Hole, Radial
- Operating Temperature Range: -40deg/C ~105+deg/C
- Ideally suited for assembly.
- Category Temp. Range –40 °C to +85 °C
- Rated W.V. Range 6.3 V.DC to 50 V.DC
- Capacitance 4.7 µF
- Capacitance Tolerance ±20 % (120 Hz/+20 °C)
- DC Leakage Cur rent I < 0.03 CV +3 (µA) After 5 minutes
- Endurance
- After 2000 hours application of DC working voltage (1000 hours for each polarity) at +85 °C±2 °C, when the capacitors are restored to 20 °C, the capacitors shall meet the following limits.
- Capacitance change ± 20 % of initial measured value
- tan δ < 150 % of initial speci? ed value
- DC leakage current < initial speci? ed value
- Shelf Life: After storage for 1000 hours at +85 °C±2 °C with no voltage applied and then being stabilized at +20 °C capacitors shall meet the limits speci? ed in Endurance. (With voltage treatme
Reviews
There are no reviews yet.